Inventory for sale is listed below

Currently TEN great prepared Bugeyes are in stock and ready for delivery to your door!

Other great classics too!

View Car
1958 Excellent Restored Leaf Green 1275 Bugeye Sprite for sale, “Luigi!”
View Car
1959 Austin Healey Sprite, restored with automatic transmission! NEW VIDEO Test drive!
View Car
1959 Custom 5-speed Austin Healey Bugeye Sprite for sale!
View Car
1959 Restored Bugeye Sprite for sale- VIDEO @ 70MPH! Five-speed, 1275 engine, disc brakes, wire wheels and more!
View Car
1960 Bugeye Sprite driving project for sale!
View Car
1978 911 SC Targa for sale with 65k miles!
View Car
59 Bugeye Sprite driver with period Kellison nose!
View Car
60 Bugeye Sprite driver for sale, “Booker”
View Car
Excellent 1960 Austin Healey 3000 Mark 1 BT7 for sale
View Car
Excellent two-owner 1959 Bugeye Sprite driver for sale! Price reduced!
View Car
Exceptional 1960 Bugeye Sprite for sale, beautifully restored!
View Car
For sale: One of the best 1959 Bugeye Sprites you can buy.
View Car
Great 1959 Austin Healey Bugeye Sprite driver for sale
View Car
Great 1959 Bugeye Sprite for sale-Shiny driver!

New product! Bugeye Sprite/Midget thin wheel spacers

This new 1/8 inch spacer solves a recurring challenge we have seen in our shop… some cars have rear tire rub issues while cornering, especially with wider than normal rear tires. With 165 or 175 series tires, these are essential and all you need to ensure the tires will not rub. Sometimes even 155 series will hit the radius arm support in the rear wheel well on spirited cornering. So we designed the perfect spacer to give just enough additional clearance and keep rear tires from rubbing.

Other spacers we have seen on the market to not fit tightly so we designed our own that fits right. This one centers on the hubs nicely to properly support the center of the wheel so you can run larger tires. Bugeyes came stock with a slightly narrower rear track and these spacers also help to make everything look a little more balanced.

Note, make sure to check the torque settings on the rear lug nuts when fitting, and after a short drive, be sure to re-torque your lug nuts. Proper torque for stock rear studs is 38lbs. When these spacers are installed, a few threads of the stock lug nut will be exposed. We also have longer studs available if you prefer to change them.

We’re excited to offer yet another custom product to fix a recurring Spridget issue!

Get your own set of wheel spacers today (or anything else you need for your Bugeye) by clicking here!!!